|
U.S. Gear Corporation,
9420 Stony Island Ave., Chicago, IL 60617 -- Phone 888-874-3275
Dana 50, 60, 70, 80
Products By
Application
American Motors
Chrysler
Dana 28, 30, 35, 44
Dana 50, 60, 70, 80
Ford 7.5, 8.8 IFS, 8.8
Ford 9", 9.75", 10.25"
GM 7.25" through 8.25"
GM 8.5" & 8.6", 8.875"
GM 9.25" through 11.5"
Toyota
Home
Products
Torq-Line Light Duty |
DANA 50
R.G. Diameter 8.5"
10 Bolt 3/8 X 24 RH
10 Bolt Cover |
Pinion
Diameter 1.376" 26 Spline
4.10 & Numerically Lower |
| Vehicle
Model |
Year |
| F250 & F350 FRONT |
78-97 |
|
|
|
OEM DANA 50 RING & PINIONS,
EMPTY CASE & INTERNALS |
|
PART # |
SPICER # |
| D50/354* |
707239-1X |
| D50/373* |
707474-1X |
| D50/410* |
707239-2X |
| D50-OPEN CASE |
706917X |
| D50-DIFF-KIT |
706916X |
| * includes pinion bearings, r.g. bolts, shims, seal, gasket, pinion nut & washer. |
DANA 60 (63-95)
R.G. Diameter 9.75"
12 Bolt 1/2 X 20 RH
10 Bolt Cover |
Pinion
Diameter 1.626" 29 Spline
4.10 & Numerically Lower
4.56 & Numerically Higher |
| Vehicle
Model |
Year |
| K30,35 F |
77-91 |
| W200,250 F&R |
69-93 |
| W300,350 F |
75-93 |
| F100 R |
67-85 |
| F250 F&R |
67-88 |
|
 |
|
OEM DANA 60 RING & PINIONS |
|
PART # |
TEETH |
RATIO |
| 25538-1X |
41-11 |
3.73 |
| 24807-1X |
41-10 |
4.10 |
| D60/430 USG T/L |
43-10 |
4.30 |
| 25127-1X |
41-09 |
4.56 |
| 25334-1X |
39-08 |
4.88 |
| 26994-1X |
41-08 |
5.13 |
| (D60/430 FITS 4.10) |
|
DANA 60 INSTALLATION COMPONENTS |
|
PART # |
DESCRIPTION |
| 05-097100 |
R&P INSTALLATION KIT |
| 05-097115 |
INST. KIT W/BEARINGS |
| 18891 |
PINION SEAL |
| 30271/275 |
PIN. NUT & WASHER |
| 182060 |
PINION SHIM SET |
| 183060 |
CARRIER SHIM SET |
| 34686 |
GASKET |
DANA 60 FRONT (REVERSE CUT) 78-92
R.G.DIAMETER 9-3/4"
12 BOLT 1/2 X 20
10 BOLT COVER |
Pinion Diameter
1.625" 29 Spline
R&P Fit 4.10 & Numerically Lower Case |
| Vehicle Model |
Year |
| F250 F |
78-79 |
| F350 F |
85-93 |
|
|
|
DANA 60 (FRONT) RING & PINIONS |
| PART # |
TEETH |
RATIO |
| D60/410R |
41-10 |
4.10R |
| D60/456R |
41-09 |
4.56R |
| D60/488R |
39-08 |
4.88R |
DANA 70
R.G. Diameter 10.5"
12 Bolt 1/2 X 20 RH
10 Bolt Cover, 5/8 Pinion Off Set |
Pinion Diameter 1.750"
29 Spline
4.10 & Numerically Lower
4.56 & Numerically Higher |
| Vehicle
Model |
Year |
| CHRYSLER |
3/4 & 1 TON TRK |
| FORD |
3/4 & 1 TON TRK |
| GM |
3/4 & 1 TON TRK |
|
 |
|
OEM DANA 70 RING & PINIONS |
|
PART # |
TEETH |
RATIO |
| 72168-5X |
46-13 |
3.54 |
| 72154-5X |
41-10 |
4.10 |
| 72152-5X |
41-09 |
4.56 |
| 72148-5X |
39-08 |
4.88 |
| 72156-5X |
47-08 |
5.86 |
| DANA 70 INSTALLATION COMPONENTS |
| PART # |
DESCRIPTION |
| R70 |
INST. KIT W/ BEARINGS |
| RSK70 |
R&P INSTALLATION KIT |
| 18891 |
PINION SEAL |
| SH3860-70 |
PINION SHIM KIT |
| 183070 |
CARRIER SHIM SET |
| 34686 |
GASKET |
DANA 80
R.G. Diameter 11.25"
12 Bolt 1/2 X 20 RH
10 Bolt Cover |
Pinion Diameter 2"
37 Spline
3.73 & Numerically Lower
4.10 & Numerically Higher |
| Vehicle
Model |
Year |
| CHEVROLET C3500 |
88&UP |
| DODGE D/W350 |
94&UP |
| FORD F350,F450 |
88&UP |
|
|
|
OEM DANA 80 RING & PINIONS |
| PART # |
SPICER# |
| D80/463* |
707060-1X |
| D80/513* |
707060-4X |
| *includes pinion bearings ,r.g. bolts, shims, seal, gasket, pinion nut & washer |
|